[Warzau]

How I installed my Rear Splash Guards

Thanks Tim I got some of my stuff today, dont know why UPS decided not to deliver the rest?

Anywho since there was at best a jpg of the installation instruction. I thought I would post how I did it.

 

[Warzau]

I raise the X till the wheel barely lifted off the ground. This is a good way to learn how to change your tire in case you dont feel like waiting for Acura roadside.

 

[Warzau]

Remove the screws that are there, save them for later. One in the back

 

[Warzau]

The other screw located here.

 

[Warzau]

My secret weapon the cyber tool from Swiss army knife Cyber tool

 

[Warzau]

I use the awl to pierce the plastic for the bottom screw. There is a dimple there so you know where to pierce the plastic.

 

[Warzau]

position the clip flat side out.

 

[Warzau]

Now come the fun part. The cyber tool has various screw heads. Phillips, Straight. and Torx. Of couse I used phillips

 

[Warzau]

There is enough room to screw in the bottom portion. BTW I have various Swiss Army Knives, most of them will fit!

 

[Warzau]

Another view

 

[Warzau]

Use the two screws you removed and install them in the back and lower screw holes, the long one supplied use for the upper screw hole in the wheel well.

 

[Warzau]

Here is the Auto Tool. I want to get this just to have in the car. It isnt listed on the Swiss website but it is still being sold.

 

[hondacuraplanet]

Great pics!

BTW, sometimes large orders do get seperated in transit, especially if some things are heavy.

 

[Warzau]

Thanks, I did call UPS it turns out that it was "human error" meaning as they put "perhaps forgot to load all the packages".

But it is coming today and I will have something to do today .