Acura MDX SUV Forums banner

1 - 5 of 5 Posts

·
Registered
Joined
·
6 Posts
Discussion Starter #1
I replaced the driver's side seat slide sensor some time ago and it has been working ever since.

Now I am noticing the same issue while moving the seat up/down, and tilt up/down...Issue being that the seat moves in 1 inch increments only.

Is there a similar fix for this?

Marlon
 

·
Registered
Joined
·
52 Posts
I believe if I remember correctly there was a bulletin regarding this. The problem was the driver's seat harness. I'll look for the bulletin tomorrow if I get a chance.
 

·
Registered
Joined
·
6 Posts
Discussion Starter #4
Thanks

I have been looking all over the place for info on this...but all that I am finding is the issue with the bad seat slide position sensor for front to back seat movement. There was a TSB on this.
 

·
Registered
Joined
·
6 Posts
Discussion Starter #5
Any other thoughts on this issue?


Just to recap...My 2006 MDX has a driver's seat position issue.


When I adjust the seat up and down, it only goes about an inch or so...so I have to let go of the switch and repeat the process.


I had the same issue with the seat moving front to back in small increments, so I changed the seat position sensor per the TSB and it works perfectly.


Any thoughts on if there is another sensor that controls the up and down movement? It seems like there should be.


Thanks in advance for your assistance.


Marlon
 
1 - 5 of 5 Posts
Top