Acura MDX SUV Forums banner

1 - 2 of 2 Posts

·
Registered
Joined
·
1 Posts
Discussion Starter #1
Hello everyone,
anybody installed here HM20 on MDX 2007-2013 ?
trying to find right connectors from kptechs blue and green cable. cannot figure our which legs are on connector.
in the installation manual description is like
GREEN – DOOR LOCK SWITCH OUTPUT
a. Connect this wire to the output of the lock cylinder. This wire will read 5
volts until you turn the key in the lock cylinder to ‘lock.’ In the ‘lock’
position it will read ground.
BLUE – DOOR LOCK MOTOR INPUT
a. Connect this wire to the wire that controls the door lock motor. This wire
will read ‘open leg’ (floating/No connection) until the door is locked.
Upon receiving a lock command from either the cylinder, the door lock
button, or the key fob this wire will read 12volts for a brief period.
i was able to find wires which are giving exact conditions but when connecting to them module did not works.
any suggestions ?
 

·
Registered
Joined
·
752 Posts
Why don't you press the oem keybob's unlock button twice and hold it on the 2nd press?
My 2007 mdx windows and sunroof will open, from my oem keyfob.

I'm pretty sure the above is the sequence.
Maybe someone can chime in, with more accurate info.
 
1 - 2 of 2 Posts
Top