Acura MDX SUV Forums banner
1 - 2 of 2 Posts

·
Registered
Joined
·
2 Posts
Hello all,
I'm having a pretty horrible day. My 2010 MDX is throwing the codes P0962, P0980 and P2720 (3 times). All three point to solenoid circuit issues. As a result, my car is having transmission issues (hard shifting and no reverse). All else is fine with the car.

Here's a little background. Right before this happened, I removed fuse 10 (ignition solenoid) as an aftermarket video was tapping into it causing battery drain. I connected the fuse again after removing the aftermarket cable tapping into it. I didnt do anything else. I'm not sure if I accidentally shorted anything while doing this.

I'm really helpless as I need the car for work tomorrow. I ordered an OBD2 scanner same day shipping on amazon today hoping clearing the codes may help solve the problem, but I dont think it will.

I appeal for help! Thank you folks!
Did you find the problem? @dgkrishy
 

·
Registered
Joined
·
2 Posts
I was getting P0980 & P2720 codes after removing the ignition Sol(15) fuse.

I finally figured out the fuse had blown(probably while I removing it). unlike other fuses that show a disconnect during inspection of the fuse, this one showed just a little brown spot at the connection - so it was difficult for me to see that initially.

Replacing it with a like fuse, resolved the codes
 
1 - 2 of 2 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top