Acura MDX SUV Forums banner

1 - 4 of 4 Posts

·
Registered
Joined
·
30 Posts
Discussion Starter #1
Is there a trick removing the plastic end caps? I need to take off the rack but can't pry the caps off.

Thanks
Mark

2002 GG MDX
 

·
Registered
Joined
·
6,531 Posts
Use a screwdriver and push them off from the small holes on the inside of the mounting brackets.
 

·
Registered
Joined
·
738 Posts
GG02-Mark said:
Thanks! Got them off. I didn't notice the hole in the back.
If you think you might have any reason to install and remove the racks again, you may want to remove the retaining clip and cut off the piece of plastic that restricts the clip from moving more freely, then re-install the clip. The clip is held in by a T10 or T15 torx screw. Makes future removals much easier.
 
1 - 4 of 4 Posts
Top