Acura MDX SUV Forums banner
1 - 2 of 2 Posts

·
Registered
Joined
·
3 Posts
Discussion Starter · #1 ·
The front 12V power socket stopped working. I checked the fuses, #21, #11, & #12. All looked good. The 12V power socket in the console and behind the console work. I checked the voltage for the socket in the console and behind the console and read 12.88V (accessory mode) and 14V with the car running. The front power socket read 10.8V (accessory) and just under 12V with the car running. Does anyone have any idea why the power socket was working one day and stop the next day. I normally run the dash cam to this socket. The dash cam is now connected to the console power socket.
 

·
Registered
Joined
·
3 Posts
Discussion Starter · #4 ·
I know you already checked, but you might want to re-check 20A fuse #12 in the passenger's side interior fuse box, since that's the one that controls the front console socket. Heck, if I were you, I would just replace it and see if that fixes it, even if the old one looks good. It's an easy and inexpensive way to check it.
Thank you for the information. Just replaced the 20A fuse with a new one and the voltage in the console socket is back to normal.
 
1 - 2 of 2 Posts
Top