Acura MDX SUV Forums banner

Discussions Showcase Albums Media Media Comments Tags Marketplace

1-3 of 3 Results
  1. Third Generation MDX (2014-2020)
    The belt tensioner pulley on my ‘14 MDX has gone bad. Assuming I choose to replace just the pulley alone, is the bolt for this part a standard or reverse thread? If I replace the belt tensioner, any tips on removal (access from the top vs from the bottom/side behind the tire)?
  2. Second Generation MDX (2007-2013)
    I could use some help. 2010 Acura MDX 170k. I replaced timing belt and water pump at 110k. The car mostly sat the last couple of years due to having a company vehicle. It may have had the noise when parked. No noise in park or neutral. No noise when coasting at speed or braking. only...
  3. First Generation MDX (2001-2006)
    Im trying to line up the marks for my timing belt and the crank is aligned and also the front Cam but the back is almost 90degrees off counter clockwise .. the Timing belt is off Should i just put a socket on the back cam bolt and adjust It to mark while belt is off or is that not what that...
1-3 of 3 Results
Top